| 摆线针轮行星传动中摆线轮最佳形量的确定方法 |
| |
| 引用本文： | 关天民.摆线针轮行星传动中摆线轮最佳形量的确定方法[J].中国机械工程,2002,13(10):811-814. |
| |
| 作者姓名： | 关天民 |
| |
| 作者单位： | 大连铁道学院,辽宁省大连市,116028 |
| |
| 基金项目： | 国家自然科学基金资助项目(59075230) |
| |
| 摘 要： | 在对摆线针轮行星传动中摆线轮的修形方式进行分析的基础上,提出了最佳修形齿廓的概念,对采用"负移距+正等距"修形方法获得最佳修形齿廓原理进行了探讨, 推导出了摆线轮最佳修形量的计算公式.采用新齿形的样机试验结果也证明了修形理论的正确性.
|
| 关 键 词： | 摆线针轮行星传动 最佳修形齿廓 最佳修形量计算公式 样机试 验验证 |
| 文章编号： | 1004-132(2002)10-0811-04 |
| 修稿时间： | 2000年10月17 |
The Optimum Profile Modification on Cycloid Disks in the Cycloid Gearing Mechanism with Small Teeth Difference |
| |
| GUAN Tianmin.The Optimum Profile Modification on Cycloid Disks in the Cycloid Gearing Mechanism with Small Teeth Difference[J].China Mechanical Engineering,2002,13(10):811-814. |
| |
| Authors: | GUAN Tianmin |
| |
| Abstract: | Based on the analysis of three different profile modification on Cycloid Disks, the concept of optimum modified tooth profile is proposed in this paper and through the combination modification of "minus moved distance + plus equidistance" the optimum tooth profile can be obtained, a series of formulas are also given to calculate the optimum modification values of moved distance and equidistance, The prototype shows that the theory is satisfactory. |
| |
| Keywords: | cycloid gearing mechanism optimum modified tooth profile optimum modification formulas prototype |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
