Fabrication of microgrooves on a curved surface by the confocal measurement system using pulse laser and continuous laser |
| |
Authors: | Noh Jiwhan Cho Ilhwan Lee Seungwoo Na Suckjoo Lee Jae-Hoon |
| |
Affiliation: | Korea Institute of Machinery & Materials, 104 Sinseongno, Yuseong-gu, Daejeon 305-343, South Korea. |
| |
Abstract: | In order to fabricate microgrooves on a curved surface, the curved surface was measured with a confocal system and then it was used for laser microprocessing. This paper proposes a new method of using a pulse laser for the confocal system to measure the curved surface. It also compares the conventional way of using a continuous laser and a new way of using the pulse laser with the confocal system. Using the data measured with the pulse laser for fabrication, microgrooves were fabricated on a curved surface. The width of the fabricated microgroove was 10 μm and the depth was 27 μm. The microgroove fabricated on a curved surface as a part of this study can be used in injection molding to manufacture a micropatterned plastic surface at a low cost. This plastic surface can be applied for a superhydrophobic surface, a self-cleaning surface, or a biochip. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|