首页 | 本学科首页   官方微博 | 高级检索  
     

某进口软锰矿还原焙烧、浸出实验研究
引用本文:邹廷信,聂程,毛拥军.某进口软锰矿还原焙烧、浸出实验研究[J].矿冶工程,2022,42(3):115-117.
作者姓名:邹廷信  聂程  毛拥军
作者单位:长沙矿冶研究院有限责任公司,湖南 长沙 410012
摘    要:根据某进口软锰矿石中锰矿物的赋存形态, 进行了还原焙烧、硫酸浸出工艺实验研究。结果表明, 适宜的还原焙烧条件为: 还原剂烟煤加入量(相对锰矿质量)12%、焙烧温度900 ℃、焙烧时间 60 min, 该条件下所得焙烧矿在液固比9∶1、硫酸浓度120 g/L、搅拌速度450 r/min条件下浸出时间60 min, 锰浸出率达96.83%。该工艺可为进口软锰矿的利用提供技术依据。

关 键 词:软锰矿  还原焙烧  硫酸浸出  
收稿时间:2021-12-13

Experimental Study on Reduction Roasting and Leaching of Imported Pyrolusite
ZOU Ting-xin,NIE Cheng,MAO Yong-jun.Experimental Study on Reduction Roasting and Leaching of Imported Pyrolusite[J].Mining and Metallurgical Engineering,2022,42(3):115-117.
Authors:ZOU Ting-xin  NIE Cheng  MAO Yong-jun
Affiliation:Changsha Research Institute of Mining and Metallurgy Co Ltd, Changsha 410012, Hunan, China
Abstract:According to the morphological characteristics of manganese minerals in an imported pyrolusite ore, an experimental study was performed by using reduction roasting and sulfuric acid leaching processes. The results show that after a 60 min-roasting process at 900 ℃ with the amount of bituminous coal at 12% (relative to the mass of manganese ore),  the obtained roasted ore is subjected to  a 60 min-leaching process with concentration of sulfuric acid at 120 g/L, the ratio of liquid to solid at 9∶1 and a stirring speed of 450 r/min, resulting in the leaching rate of manganese  up to 96.83%. This research result can provide technical reference for the utilization of  imported pyrolusite.
Keywords:pyrolusite  reduction roasting  sulfuric acid leaching  
点击此处可从《矿冶工程》浏览原始摘要信息
点击此处可从《矿冶工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号