| 基于PFC2D的冬瓜山铜矿爆破参数优化 |
| |
| 引用本文： | 黄尘,李江腾,赵远,刘双飞.基于PFC2D的冬瓜山铜矿爆破参数优化[J].矿冶工程,2022,42(1):1-4. |
| |
| 作者姓名： | 黄尘 李江腾 赵远 刘双飞 |
| |
| 作者单位： | 中南大学 资源与安全工程学院,湖南 长沙 410083 |
| |
| 基金项目： | 国家自然科学基金(51979293)； |
| |
| 摘 要： | 以铜陵冬瓜山铜矿采场爆破为研究对象,基于矿山爆破设计参数,建立了PFC2D数值爆破模型,对拟定的12组不同爆破参数进行模拟优化试验,通过分析不同参数下模拟爆破效果及监测点的应力值,得出最优爆破参数为: 排距2.5 m、孔距2.5 m;现场生产实践证实,采用此爆破参数时能达到良好的爆破效果,验证了PFC2D数值程序模拟爆破的可行性。
|
| 关 键 词： | 冬瓜山铜矿 PFC2D 爆破参数 排距 孔距 |
| 收稿时间： | 2021-10-25 |
Optimization of Blasting Parameters for Dongguashan Copper Mine Based on PFC2D |
| |
| HUANG Chen,LI Jiang-teng,ZHAO Yuan,LIU Shuang-fei.Optimization of Blasting Parameters for Dongguashan Copper Mine Based on PFC2D[J].Mining and Metallurgical Engineering,2022,42(1):1-4. |
| |
| Authors: | HUANG Chen LI Jiang-teng ZHAO Yuan LIU Shuang-fei |
| |
| Affiliation: | School of Resources and Safety Engineering, Central South University, Changsha 410083, Hunan, China |
| |
| Abstract: | Based on the design of blasting parameters for mines, a PFC2D blast model was established for Dongguashan Copper Mine, and simulation tests with planned 12 groups of different blasting parameters were then performed for parameter optimization. After the analysis of the simulated blasting effect and stress values of the monitoring points under different parameters, the optimal blasting parameters were finally determined, including spacing between rows at 2.5 m and the spacing between holes at 2.5 m. The on-site practical production has proven that a good blasting effect can be achieved with the above parameters, verifying the feasibility of numerical program (PFC2D) to simulate blasting effect. |
| |
| Keywords: | Dongguashan Copper Mine PFC2D blasting parameters spacing between rows spacing between holes |
|
| 点击此处可从《矿冶工程》浏览原始摘要信息 |
|
点击此处可从《矿冶工程》下载全文 |
|
