升深2-17井络合铝聚合物充气钻井液现场试验

为加快徐加固子深层天然气的勘探开发步伐，缩短深层气井的建井周期，在升深2-17井进行了充气钻井试验。介绍了络合铝聚合物充气钻井液技术的现场应用概况及效果以及井漏的发生与处理过程、钻井液起泡的解决措施。在现场试验过程中，络合铝聚合物钻井液性能稳定，具有较强的抑制性和较好的流变性能，流性指数控制在0．7左右，具有良好的携屑和稳定井壁能力，而且粘度较低，基本上控制在33～52s之间，满足了现场充气和脱气的需要；该钻井液抗温可达180℃，润滑性能较好，在钻井过程中无粘卡显示，在深井欠平衡井眼稳定方面取得了较好的效果；在不同的气液比条件下，可以在0．83～1．08g／cm。之间实现对当量密度的调节;与常规钻井工艺相比，充气钻井可以使机械钻速提高30％～50％；在钻进过程中实现了充气和点火同时进行，达到了欠平衡钻井工艺技术的要求，为进一步开展气体钻井打下了良好的基础。

Field Experiment of Aerated Drilling Fluid Treated with Aluminum Complex Polymer Compound in Well SH-1

The field test in well SH-1 fully demonstrated that the aerated drilling fluid treated with aluminum complex polymer compound possesses good cutting carrying and borehole wall stabilizing capacity and easily to be aerated and de-aerated.Compared with routine drilling technology,the drilling with aerated drilling fluid can increase penetration rate by 30%~50%.Meanwhile the simultaneous aerating and lighting was successfully realized that correctly responds the requirements of under-balance drilling technology.