| 回火时间对0．16C－10Ni－14Co－1Cr－1Mo钢和0．23C－12Ni－14Co－3Cr－1Mo钢组织与性能的影响 |
| |
| 引用本文： | 钟平,凌斌,古宝珠. 回火时间对0．16C－10Ni－14Co－1Cr－1Mo钢和0．23C－12Ni－14Co－3Cr－1Mo钢组织与性能的影响[J]. 特殊钢, 1996, 0(4) |
| |
| 作者姓名： | 钟平 凌斌 古宝珠 |
| |
| 作者单位： | 北京航空材料研究所 |
| |
| 摘 要： | 研究了０．１６Ｃ－１０Ｎｉ－１４Ｃｏ－１Ｃｒ－１Ｍｏ（１６ＮｉＣｏ）钢在５１０℃和０．２３℃－１２Ｎｉ－１４Ｃｏ－３Ｃｒ－１Ｍｏ（２３ＮｉＣｏ）钢在４８２℃回火的组织与性能。随回火时间的延长，强度、硬度的降低主要是由于Ｍ_２Ｃ的粗化及与基体共格性降低所致。Ｍ_２Ｃ的粗化速度２３ＮｉＣｏ钢要小于１６ＮｉＣｏ钢。
|
| 关 键 词： | 高合金，二次硬化，超高强钢，M_2C |
Effect of Tempering Time on Microstructure and Properties of Steel 0. 16C-10Ni-14Co-1Cr-1Mo and Steel 0. 23C-12Ni-14Co-3Cr-1Mo |
| |
| Zhong Ping, Ling Bin and Gu Baozhu. Effect of Tempering Time on Microstructure and Properties of Steel 0. 16C-10Ni-14Co-1Cr-1Mo and Steel 0. 23C-12Ni-14Co-3Cr-1Mo[J]. Special Steel, 1996, 0(4) |
| |
| Authors: | Zhong Ping Ling Bin Gu Baozhu |
| |
| Abstract: | The effect of tempering time on microstructure and mechanical properties of steel 0. 16C--10Ni14Co-ICr--IMc (16NiCo ) tempered at 510C and steel 0. 23C-12Ni--14Co-3Cr-IMc (23NiCo ) tempered at482C has been studied. The results show that with increasing tempering time the decrease of hardness andstrength of steel is attributed to coarseuing of M=C carbides and decreasing of its coherency with matrix ofsteel. The coarseeing rate of MZC carbides in steel 23NiCo is less then that in steel 16NiCo. |
| |
| Keywords: | High Alloy Secondary Hardening Ultrahigh Strength Steel M_2C |
| 本文献已被 CNKI 等数据库收录！ |
