| 等离子MIG焊接铝合金的规范优化及组织分析 |
| |
| 引用本文： | 田云,李德元,董晓强,王赫莹,赵春元. 等离子MIG焊接铝合金的规范优化及组织分析[J]. 沈阳工业大学学报, 2004, 26(5): 502-505 |
| |
| 作者姓名： | 田云 李德元 董晓强 王赫莹 赵春元 |
| |
| 作者单位： | 1. 沈阳工业大学,材料科学与工程学院,辽宁,沈阳,110023
2. 沈阳工程学院,辽宁,沈阳,110036 |
| |
| 基金项目： | 辽宁省教育厅高校科研基金项目(20142219) |
| |
| 摘 要： | 通过对等离子MIG焊接铝合金的规范进行试验分析，得出不同的焊接规范对焊缝成型和组织的具体影响．结果表明：在其它条件不变时，焊接总电流增大，焊缝宽和熔深都增加，Al-Mg合金的晶粒度变粗，且分布趋向不均匀，Al-Si合金所受影响较小；焊接总电流不变，等离子弧电流增加，而MIG弧电流减小，焊缝宽和熔深都减小，Al-Mg合金的组织基本没有变化，而Al-Si合金的晶粒度却随着MIG弧电流的减小而变细。
|
| 关 键 词： | 等离子MIG焊 铝合金 焊缝成型 |
| 文章编号： | 1000-1646(2004)05-0502-04 |
| 修稿时间： | 2003-09-08 |
Normative optimization and tissue analysis of Al-alloy of PLASMA-MIG welding |
| |
| TIAN Yun,LI De-yuan,DONG Xiao-qiang,WANG He-ying,ZHAO Chun-yuan. Normative optimization and tissue analysis of Al-alloy of PLASMA-MIG welding[J]. Journal of Shenyang University of Technology, 2004, 26(5): 502-505 |
| |
| Authors: | TIAN Yun LI De-yuan DONG Xiao-qiang WANG He-ying ZHAO Chun-yuan |
| |
| Affiliation: | TIAN Yun~1,LI De-yuan~1,DONG Xiao-qiang~1,WANG He-ying~1,ZHAO Chun-yuan~2 |
| |
| Abstract: | By analysis of Al-alloy specification of PLASMA-MIG welding, elicits concrete influence on welding-seam molding and tissue with different welding specification .The results testify: when other conditions hold the line ,with the augmentation of welding general current,weld breadth and weld depth enhance,the size of crystal grain of Al-Mg alloy becomes rough and the distribution is asymmetry,but the influence on Al-Si alloy is very little; for invariable welding general current, increasing PLASMA-arc current, decreasing MIG-arc current, it is found that weld breadth and depth minish,the tissue of Al-Mg alloy almost holds the line, but the size of crystal grain of Al-Si alloy becomes fine with the decreasing MIG-arc current. |
| |
| Keywords: | PLASMA-MIG welding Al-alloy welding-seam moldeing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
