| 波纹火焰筒数值模拟成形技术研究 |
| |
| 引用本文： | 刘林波,周 恺,高宏波. 波纹火焰筒数值模拟成形技术研究[J]. 战术导弹技术, 2014, 0(2): 53-56 |
| |
| 作者姓名： | 刘林波 周 恺 高宏波 |
| |
| 作者单位： | 北京动力机械研究所,北京100074 |
| |
| 摘 要： | 针对波纹火焰筒提出了刚模逐节冲压成形、刚模对称冲压成形、粘性介质外压成形和粘性介质内压成形等四种成形方案,并对其成形过程进行了有限元分析,得到了四种成形工艺方案的壁厚分布、壁厚减薄率分布和卸载回弹结果。研究表明,粘性介质外压成形得到的波纹火焰筒构件的壁厚分布最为均匀,卸载回弹量最小,壁厚减薄率小于粘性介质内压成形。
|
| 关 键 词： | 波纹火焰筒 粘性介质 成形 |
Numerical Simulation of Ripple Flame Chamber Forming |
| |
| Liu Linbo,Zhou Kai,Gao Hongbo. Numerical Simulation of Ripple Flame Chamber Forming[J]. Tactical Missile Technology, 2014, 0(2): 53-56 |
| |
| Authors: | Liu Linbo Zhou Kai Gao Hongbo |
| |
| Affiliation: | (Beijing Power Machinery Institute, Beijing 100074, China) |
| |
| Abstract: | Four formed plans of ripple flame chamber are put forward. These formation plans include stepped stamping of rigid mould, symmetrical stamping of rigid mould, viscous medium formation of ex- ternal pressure and viscous medium formation of internal pressure. Formed process is analyzed through fi- nite-element. The distribution of wall thickness, the distribution of wall thickness reduction ratio and the rebound result after unload are obtained. Research indicate that distribution of wall thickness of viscous medium formation of external pressure is the evenest and the rebound result after unload is the least. The reduction ratio of wall thickness of external pressure is less than the internal pressure＇ s. |
| |
| Keywords: | ripple flame chamber viscous medium formation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
