首页 | 本学科首页   官方微博 | 高级检索  
     

短炭纤维增强C/C-SiC制动材料的摩擦磨损性能
引用本文:杨阳,熊翔,肖鹏,旷文敏,姜四洲.短炭纤维增强C/C-SiC制动材料的摩擦磨损性能[J].中国有色金属学报,2007,17(8):1260-1265.
作者姓名:杨阳  熊翔  肖鹏  旷文敏  姜四洲
作者单位:中南大学,粉末冶金国家重点实验室,长沙,410083
基金项目:国家高技术研究发展计划(863计划);湖南省杰出青年科学基金
摘    要:采用温压?原位反应法制备C/C-SiC复合材料,利用QDM150型摩擦试验机研究短炭纤维(SCF)长度和纤维体积分数对C/C-SiC制动材料摩擦磨损性能的影响。结果表明:C/C-SiC制动材料能够保持较高且稳定的摩擦因数;SCF的体积分数将影响C/C-SiC制动材料的摩擦磨损性能,纤维体积分数为10%时,材料具有适中的摩擦因数和较低的磨损率;SCF长度对C/C-SiC制动材料的摩擦磨损性能有显著影响,炭纤维长度为12 mm时,材料具有最佳的摩擦磨损性能。

关 键 词:短炭纤维  C/C-SiC复合材料  摩擦磨损
文章编号:1004-0609(2007)08-1260-06
收稿时间:2006-12-28
修稿时间:2006-12-282007-05-25

Friction and wear properties of short carbon fiber reinforced C/C-SiC braking materials
YANG Yang,XIONG Xiang,XIAO Peng,KUANG Wen-min,JANG Si-zhou.Friction and wear properties of short carbon fiber reinforced C/C-SiC braking materials[J].The Chinese Journal of Nonferrous Metals,2007,17(8):1260-1265.
Authors:YANG Yang  XIONG Xiang  XIAO Peng  KUANG Wen-min  JANG Si-zhou
Affiliation:State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China
Abstract:C/C-SiC composites were manufactured by warm compacted-in suit reacted process. The influence of short carbon fiber length and content on the friction and wear behaviors of C/C-SiC composites was investigated using QDM-150 wear tester. The results show that C/C-SiC composites can keep high and stable friction coefficient. The friction and wear behaviors of C/C-SiC composites are affected by carbon fiber content. When the volume fraction of fiber is 10%, the material has moderate friction coefficient and lower wear rate, The length of carbon fibers significantly influences the friction and wear behaviors of C/C-SiC composites. When the length of carbon fiber is 12 mm, the material has the best friction and wear properties.
Keywords:short carbon fiber  C/C-SiC composite  friction and wear
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号