首页 | 本学科首页   官方微博 | 高级检索  
     

镁合金AZ31搅拌摩擦焊接头的微观组织
引用本文:张华,林三宝,吴林,冯吉才,郭和平.镁合金AZ31搅拌摩擦焊接头的微观组织[J].中国有色金属学报,2003,13(6):1510-1513.
作者姓名:张华  林三宝  吴林  冯吉才  郭和平
作者单位:1. 哈尔滨工业大学,现代焊接生产技术国家重点实验室,哈尔滨,150001
2. 北京航空工艺研究所,北京,100024
基金项目:国家高技术研究发展专项经费资助项目(2002AA331160)
摘    要:采用搅拌摩擦焊接法焊接了镁合金AZ31, 研究了焊接参数对焊接接头微观组织和显微硬度的影响. 结果表明 焊接接头成形良好, 焊缝没有气孔、裂纹和夹渣, 焊缝区的显微硬度比母材稍有降低, 但降低幅度不大.

关 键 词:搅拌摩擦焊    镁合金    显微组织    显微硬度
文章编号:1004-0609(2003)06-1510-04
修稿时间:2003年1月13日

Microstructure of friction stir welds in AZ31 magnesium alloy
ZHANG Hua,LIN San-bao,WU Lin,FENG Ji-cai,GUO He-ping.Microstructure of friction stir welds in AZ31 magnesium alloy[J].The Chinese Journal of Nonferrous Metals,2003,13(6):1510-1513.
Authors:ZHANG Hua  LIN San-bao  WU Lin  FENG Ji-cai  GUO He-ping
Affiliation:ZHANG Hua~1,LIN San-bao~1,WU Lin~1,FENG Ji-cai~1,GUO He-ping~2
Abstract:AZ31 magnesium alloy was welded by friction stir welding(FSW), and the changes of microstructure and micro-hardness caused by different welding parameters were also studied. The results indicate that good joints without porosity, crack and dregs are obtained and micro hardness in nugget zone is a little lower than the parent metal.
Keywords:friction stir welding  magnesium alloy  microstructure  micro-hardness
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号