|
|||||
|
|
| 转化气废热锅炉换热管板坡口加工及焊接工艺 | |
| 引用本文： | 陈虎,陈万荣,陈宏梅,丁中清. 转化气废热锅炉换热管板坡口加工及焊接工艺[J]. 中国化工装备, 2011, 13(6): 25-32 |
| 作者姓名： | 陈虎 陈万荣 陈宏梅 丁中清 |
| 作者单位： | 1. 山东省特种设备检验研究院滨州分院,滨州,256600 2. 南京市锅炉压力容器检验研究院,南京,210002 3. 中国化学工程第十四建设有限公司 南京210044 |
| 摘 要： | 本文针对转化气废热锅炉炉体换热部分薄型管板焊接与R型坡口结构设计的特点,通过革新完成了管板R型坡口的加工,经过试验及采取防止焊接变形的控制措施,形成了合理、可行的管板与换热管的焊接工艺。 |
| 关 键 词： | 薄型管板 R型坡口 变形控制 焊接工艺 |
Transformation Gas Waste Heat Boiler Heat Exchange Tube Plate Edge Preparation and Welding Procedure |
|
| Chen Hu,Chen Wan-rong,Chen Hong-mei,Ding Zhong-qing. Transformation Gas Waste Heat Boiler Heat Exchange Tube Plate Edge Preparation and Welding Procedure[J]. China Chemical Industry Equipment, 2011, 13(6): 25-32 | |
| Authors: | Chen Hu Chen Wan-rong Chen Hong-mei Ding Zhong-qing |
| Affiliation: | Chen Hu(Shandong Special Equipment Inspection Institute Binzhou Branch,Binzhou 256600) Chen Wan-rong(Nanjing Institute of Boiler and Pressure Vessel Inspection,Nanjing 210002) Chen Hong-mei,Ding Zhong-qing(Chinese National Chemical Engineering No.14 Construction Co.,LTD.,Nanjing 210044) |
| Abstract: | In this paper,specific to the transformation gas waste heat boiler equipment manufacturing(furnace heat tube plate thin part) and R type groove of the structure design characteristics,the tube plate R type of groove processing has be finished through the innovation.After test and taking control measures to avoid the welding deformation,it formed the reasonable,feasible welding procedure of heat exchange tube and tube sheet. |
| Keywords: | thin tube plate R type groove deformation control welding procedure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |