| 调头镗孔工件与刀具装夹位置的合理确定 |
| |
| 引用本文： | 刘裕先.调头镗孔工件与刀具装夹位置的合理确定[J].制造技术与机床,1990(4). |
| |
| 作者姓名： | 刘裕先 |
| |
| 作者单位： | 沈阳大学 |
| |
| 摘 要： | 本文以提高同轴度为目的，推导出在调头镗孔时，工件固定于工作台上，工作台固定于床身上（刀具进给时）以及装夹刀具之镗轴伸出（工件进给时）的最佳位置。
|
| 关 键 词： | 调头镗孔 同轴度 工件 刀具最佳位置 |
Rational determination of the clamping position of workpiece and tools during turnover boring |
| |
| Liu Yuxian.Rational determination of the clamping position of workpiece and tools during turnover boring[J].Manufacturing Technology & Machine Tool,1990(4). |
| |
| Authors: | Liu Yuxian |
| |
| Abstract: | In order to improve the coaxality during turnover boring, the optimal Position of workpiece clamped on the table, the optimal position of table set on the bed (as the tool is feeding), and the optima] extending length of spindle (as the workpiece is feeding) have been derived in this paper. |
| |
| Keywords: | , |
| 本文献已被 CNKI 等数据库收录！ |
|
