| 油封骨架成形工艺及模具改进 |
| |
| 引用本文： | 彭颋,聂兰启,葛宝华.油封骨架成形工艺及模具改进[J].精密成形工程,2014,6(4):85-88. |
| |
| 作者姓名： | 彭颋 聂兰启 葛宝华 |
| |
| 作者单位： | 西南技术工程研究所, 重庆 400039;山东红旗机电有限公司, 潍坊 261031;山东红旗机电有限公司, 潍坊 261031 |
| |
| 摘 要： | 目的解决骨架生产效率低的问题。方法基于对原生产工艺的分析,提出了采用多工位级进模工艺生产该零件,同时,对该零件排样设计中遇到的2个技术问题提出了解决措施。结果经工艺和模具改进后,生产效率得到了大大提高,工人的劳动强度大大降低,满足了大批量生产的要求。结论通过采取有效措施,解决了多工位级进模排样,必须先落料后拉深成形的难题,为同类型零件的加工提供了参考。
|
| 关 键 词： | 骨架 排样 多工位级进模 冲孔 拉深 |
| 收稿时间： | 2014/5/15 0:00:00 |
| 修稿时间： | 7/1/2014 12:00:00 AM |
Forming Technology and Die Improving of Oil Seal Frame |
| |
| PENG Ting,NIE Lan-qi and GE Bao-hua.Forming Technology and Die Improving of Oil Seal Frame[J].Journal of Netshape Forming Engineering,2014,6(4):85-88. |
| |
| Authors: | PENG Ting NIE Lan-qi and GE Bao-hua |
| |
| Affiliation: | Southwest Technology and Engineering Research Institute, Chongqing 400039, China;Shandong Hongqi Electromechanical Co. , Ltd. , Weifang 261031, China;Shandong Hongqi Electromechanical Co. , Ltd. , Weifang 261031, China |
| |
| Abstract: | Objective To solve the low production efficiency problem of oil seal frame. Methods Based on the investigation of the original manufacturing process, we proposed a multi-position progressive die to produce this part, meanwhile, two technical problems encountered in layout design were solved. Results The optimized process and dies could improve the production efficiency, reduce the labor intensity and meet the requirements of mass production. Conclusion By taking effective measures, the difficult problem that multi-position progressive die layout must be drawn before blanking was solved, which also provides reference for the production of similar parts. |
| |
| Keywords: | frame layout multi-position progressive die punching drawing |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
