| AZ91D镁合金薄壁管高速滚珠旋压贴模特性数值模拟 |
| |
| 引用本文： | 郝琳璐,赵春江,白磊,安俊静. AZ91D镁合金薄壁管高速滚珠旋压贴模特性数值模拟[J]. 重型机械, 2014, 0(3): 14-17 |
| |
| 作者姓名： | 郝琳璐 赵春江 白磊 安俊静 |
| |
| 作者单位： | 太原科技大学机械工程研究生院; |
| |
| 基金项目： | 国家自然科学基金项目(51375235) |
| |
| 摘 要： | 应用PRO/E软件建立薄壁管滚珠旋压成形的三维有限元模型,有限元软件ANSYS/LSDYNA对影响滚珠旋压加工的关键工艺参数——进给比进行模拟,通过对比模拟结果,分析了进给比对薄壁管成形过程中贴模特性和扩径特性的影响及扩径的形成原因,得出合理的进给比以及进给比对薄壁管贴模特性的影响规律,为进一步研究镁合金薄壁管滚珠成形规律奠定了基础。
|
| 关 键 词： | 镁合金 滚珠旋压 数值模拟 |
A high-speed ball spinning film features numerical simulation of AZ91D magnesium alloy Thin-walled tube forming |
| |
| HAO Lin-lu,ZHAO Chun-jiang,BAI Lei,AN Jun-jing. A high-speed ball spinning film features numerical simulation of AZ91D magnesium alloy Thin-walled tube forming[J]. Heavy Machinery, 2014, 0(3): 14-17 |
| |
| Authors: | HAO Lin-lu ZHAO Chun-jiang BAI Lei AN Jun-jing |
| |
| Affiliation: | ( School of mechanical engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China) |
| |
| Abstract: | A three-dimensional finite element model of ball spinning forming was established with PRO /E software,and one of key technical parameters which influence the machinery of ball spinning,namely feed ratio,was simulated with finite element software ANSYS /LS-DYNA. Then the influences of feed ratio on film and expanding features in the process of thin-walled tube forming were analyzed,furthermore the forming reason of expanding was also studied via the comparison of simulated results. Finally,reasonable feed ratio and influence law that on film features of thin-walled tube has been obtained,which laid a foundation on the further study of ball forming law of magnesium alloy thin-walled tube. |
| |
| Keywords: | magnesium alloy ball spinning numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
