首页 | 本学科首页   官方微博 | 高级检索  
     

利用酸洗废水制备絮凝剂的工艺研究
引用本文:张展,张大奎,姚君,贾楠楠,张馨予,王晓楠.利用酸洗废水制备絮凝剂的工艺研究[J].鞍钢技术,2020(2):36-38,46.
作者姓名:张展  张大奎  姚君  贾楠楠  张馨予  王晓楠
作者单位:鞍钢集团钢铁研究院;鞍钢化学科技公司
摘    要:为了利用钢铁企业的酸洗废水和臭氧资源制备氯化铁絮凝剂,分析了臭氧流量、水溶液温度和稳定剂对絮凝剂聚合效果的影响。结果表明,当水溶液温度为45℃、臭氧流量为0.4 m^3/min、磷酸二氢盐作为稳定剂且加入量保持在P/Fe为0.04时,制得氯化铁絮凝剂的氨氮和化学需氧量指标均符合要求。

关 键 词:酸洗废水  氯化铁絮凝剂  臭氧  氧化水解

Study on Processes of Preparing Flocculants by Pickling Waste Water
Zhang Zhan,Zhang Dakui,Yao Jun,Jia Nannan,Zhang Xinyu,Wang Xiaonan.Study on Processes of Preparing Flocculants by Pickling Waste Water[J].Aisc Techniques,2020(2):36-38,46.
Authors:Zhang Zhan  Zhang Dakui  Yao Jun  Jia Nannan  Zhang Xinyu  Wang Xiaonan
Affiliation:(Ansteel Iron&Steel Research Institutes,Anshan 114009,Liaoning,China;Ansteel Chemical Technology Co.,Ltd.,Anshan 114021,Liaoning,China)
Abstract:In order to prepare ferric chloride flocculants by pickling waste water and ozone resources in iron and steel enterprises,the effect of such factors as flow rate of ozone,temperature of aqueous solution and stabilizer on flocculant polymerization was analyzed.The analytical results demonstrated that the indexes of both ammonia nitrogen and chemical oxygen requirement for the prepared ferric chloride flocculants could meet the requirements as the temperature of the aqueous solution was 45℃,the flow rate of ozone was 0.4 m^3/min,the dihydrogen phosphate was used as a stabilizer with adding amount of P/Fe to be 0.04.
Keywords:pickling waste water  ferric chloride flocculant  ozone  oxidative hydrolysis
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号