航标类紧固件十字槽发纹问题分析及解决措施 |
| |
引用本文: | 李红进,王伟,汪亦凡,李涛,陈宏科.航标类紧固件十字槽发纹问题分析及解决措施[J].四川有色金属,2020(1):47-49. |
| |
作者姓名: | 李红进 王伟 汪亦凡 李涛 陈宏科 |
| |
作者单位: | 安徽天航机电有限公司,安徽芜湖241000;国营芜湖机械厂,安徽芜湖241000 |
| |
摘 要: | 材料为30CrMnSiA的航标类紧固件,某工厂在自制加工过程中,连续发现十字槽底部有较为严重的发纹现象,部分已形成裂纹。通过从原材料、预冲孔大小、压力机床速度以及模具等方面对发纹形成原因进行分析,并提出解决措施。
|
关 键 词: | 十字槽发纹 问题分析 解决措施 |
Analysis and Control of Cross-groove Hairline of Navigational-type Fasteners |
| |
Affiliation: | (Anhui Tianhang Mechanical and Electrical Co.,Ltd.,Wuhu 241000,China;State Wuhu Machinery Factory,Wuhu 241000,China) |
| |
Abstract: | In the process of manufacturing 30CrMnSiA navigational-type fasteners,a factory found that there was a serious hairline phenomenon at the depth of more than 0.25mm below the bottom of the cross-groove,and some cracks were formed.The causes of the formation were analyzed from the aspects of the raw materials,the perpunching size,the punching speed and the mold.Meanwhile,the control measures were also proposed. |
| |
Keywords: | cross-groove hairline problem analysis resolved measures |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|