首页 | 本学科首页   官方微博 | 高级检索  
     

激光诱导击穿光谱结合多变量回归法对石灰岩中主量元素的定量分析
引用本文:陈君玺,陈莎,杨燕婷,王旭,段忆翔. 激光诱导击穿光谱结合多变量回归法对石灰岩中主量元素的定量分析[J]. 冶金分析, 2021, 41(1): 13-23. DOI: 10.13228/j.boyuan.issn1000-7571.011161
作者姓名:陈君玺  陈莎  杨燕婷  王旭  段忆翔
作者单位:1.四川大学化学工程学院,四川成都 610065; 2.四川大学机械工程学院,四川成都 610065; 3.成都艾立本科技有限公司,四川成都 610000
基金项目:国家重大科学仪器设备开发专项(No.2011YQ030113)
摘    要:石灰岩由于其优异的矿物学特性,在近年来已广泛用于冶金、制造、化学、建筑等领域.其中包含的碳酸盐与非碳酸盐成分如CaO、SiO2、Fe2O3和MgO等对其工业应用起着重要作用.因此,为了实现对石灰岩中以上成分的准确定量,从而最大程度开发其商业价值,基于便携式激光诱导击穿光谱仪(LIBS-Tracer),分别结合单变量分析...

关 键 词:石灰岩  激光诱导击穿光谱(LIBS)  偏最小二乘回归(PLSR)  主成分回归(PCR)
收稿时间:2020-05-19

Quantification of major elements in limestones using laser-induced breakdown spectroscopy combined with multivariate regression approaches
CHEN Junxi,CHEN Sha,YANG Yanting,WANG XuDUAN Yixiang. Quantification of major elements in limestones using laser-induced breakdown spectroscopy combined with multivariate regression approaches[J]. Metallurgical Analysis, 2021, 41(1): 13-23. DOI: 10.13228/j.boyuan.issn1000-7571.011161
Authors:CHEN Junxi  CHEN Sha  YANG Yanting  WANG XuDUAN Yixiang
Affiliation:1. School of Chemical Engineering,Sichuan University,Chengdu 610065,China; 2. School of Mechanical Engineering,Sichuan University,Chengdu 610065,China; 3. Chengdu Aliben Science & Technology Co.,LTD.,Chengdu 610000,China
Abstract:Limestones had been widely used in metallurgy,manufacturing,chemistry,architecture,etc.in recent years due to its excellent mineralogical properties.The carbonate and non-carbonate components,such as CaO,SiO2,Fe2O3 and MgO,played important roles in the industrial application of limestones.Therefore,in order to achieve accurate quantification of the components above in limestones and maximize their commercial value,the quantitative analysis of four major elements including Ca,Si,Fe and Mg was investigated based on a portable laser-induced breakdown spectrometer (LIBS) combined with univariate model,partial least square regression and principal component regression.The results of cross validation were used as the criteria for parameter optimization of multivariate regression models.The predictive determination coefficient,the root mean square error of prediction and the relative standard deviation of test set were applied to evaluate the quantitative accuracy and stability of these three regression models.The results showed that the multivariate regression methods improved the quantitative performance of traditional univariate analysis significantly.Among them,the principal component regression performed best.The four elements achieved the predictive determination coefficient of 0.999 8,0.999 6,0.999 6 and 0.999 0,and the root mean square errors of prediction of 0.066 6%,0.089 3%,0.014 8% and 0.038 9%,respectively,and the relative standard deviations of 1.00%,5.04%,5.03% and 13.18%,respectively.It was indicated that the multivariate regression model could not only correct the quantitative accuracy deviation of traditional univariate analysis caused by matrix effects and spectral line interference,but also adjust the detection instability caused by environment,hardware system and samples.Furthermore,principal component regression could be a reliable method for the portable LIBS quantitative analysis of major elements in limestone samples.
Keywords:limestone  laser-induced breakdown spectroscopy  partial least square regression(PLSR)  principal component regression (PCR)  
本文献已被 CNKI 等数据库收录!
点击此处可从《冶金分析》浏览原始摘要信息
点击此处可从《冶金分析》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号