| 引信炮口感应装定系统中的接地技术 |
| |
| 引用本文： | 王晖,王建斌,陈荷娟.引信炮口感应装定系统中的接地技术[J].火炮发射与控制学报,2010(1). |
| |
| 作者姓名： | 王晖 王建斌 陈荷娟 |
| |
| 作者单位： | 1. 南京理工大学,机械工程学院,南京,210094
2. 山西北方惠丰机电有限公司,山西,长治,046012 |
| |
| 摘 要： | 炮口感应装定式引信系统包括炮口的信号发射模块和弹丸中感应接收模块,两者之间没有有线连接。由于安装在炮口这个特殊位置,工作过程中受到复杂的电磁干扰。发射模块中编码器和解调及解码器是数字电路,驱动及发送电路和起爆控制电路为模拟电路。针对抗干扰设计中的接地方式,通过分析电源的瞬态干扰、系统内不同方式接地易造成共阻抗干扰和共模干扰的原因,发现地线产生的干扰和工作电流相当。谐振回路、模拟电路和数字电路、小功率信号处理电路和大功率做功电路和起爆电路各模块内采用单点串联接地,模块与模块之间采用单点并联接地并就近与引信壳体连接。高频电路模块应各自形成回路,减小与地线间的耦合。
|
| 关 键 词： | 电子技术 引信 感应装定 电磁兼容性 接地技术 |
Ground Connection Technology in Muzzle Fuze Induction Setting System |
| |
| WANG Hui,WANG Jian-bin,CHEN He-juan.Ground Connection Technology in Muzzle Fuze Induction Setting System[J].Gun Launch & Control Journal,2010(1). |
| |
| Authors: | WANG Hui WANG Jian-bin CHEN He-juan |
| |
| Affiliation: | 1.Mechanical Engineering College;Nanjing University of Science and Technology;Nanjing 210094;Jiangsu;China;2.Shanxi North Huifeng Mechanical & Electronic Ltd Co.;Changzhi 046012;Shanxi;China |
| |
| Abstract: | Muzzle fuze induction setting system consists of signal emission module mounted on muzzle and induction receiving module in projectile,these two modules are connected by wireless.Because of mounting on the special position of muzzle,the signal emission module works under complex electromagnetic interference.The coder and signal processing circuits in signal emission module are digital,emission and detonation circuits are analog.Aimed at the ground connection mode in anti-interference design,by means of anal... |
| |
| Keywords: | electronics fuze induction set electromagnetic compatibility ground connection technology |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
