| Abstract: | The effect of reagents used in separating chalcopyrite from pyrite on the cake moisture of the copper concentrate at Daye Iron Mine Mineral Processing Plant was investigated. The results showed that the dosage of lime used for depressing pyrite was the main factor that increased the filter cake moisture of copper concentrate. With increasing the dosage of lime, the cake moisture of copper concentrate increased sharply. The cause was concluded to be the addition of lime to the pulp, which resulted in the formation of floc and a high pH value. The collector Z-200#, used for collecting chalcopyrite, had, as well, an adverse effect on the cake moisture of copper concentrate, but its effect was inferior in respect to that of lime. The cake moisture of copper concentrate can be decreased by changing the method with which lime is added and the pH value of pulp is regulated. The experiment results showed that the sulfuric acid was the best regulator. When the clarified liquor of lime was used as a depressant and the pH value of the pulp was regulated to 6.5?7.0 by adding sulfuric acid, the cake moisture of copper concentrate was reduced from 15.49% to 13.13%. The examination of chalcopyrite surface by using ESCA (Electron Spectroscopy for Chemical Analysis) showed that calcium sulfate and iron hydroxide had formed on the surface of chalcopyrite when lime was added to the pulp. The formation of calcium sulfate and iron hydroxide on its surface increased the hydrophilicity of chalcopyrite so that its cake moisture increased. The addition of sulfuric acid to the pulp not only removed the calcium sulfate, but also reduced the concentration of iron hydroxide on the surface of chalcopyrite so that the cake moisture of copper concentrate was decreased. |
