| Pro/ENGINEER中的汽轮发电机定子绕组三维建模及参数系列化设计 |
| |
| 引用本文： | 金丽萍,何圣熙. Pro/ENGINEER中的汽轮发电机定子绕组三维建模及参数系列化设计[J]. 工程图学学报, 2007, 28(2): 31-38 |
| |
| 作者姓名： | 金丽萍 何圣熙 |
| |
| 作者单位： | 中国地质大学机械与电子工程学院,湖北,武汉,430074 |
| |
| 摘 要： | 提出了一种利用Pro/E进行汽轮发电机定子绕组参数系列化三维建模的方法.针对汽轮发电机定子绕组端部结构复杂,但成型机理相同的特点,利用Pro/E建立了汽轮发电机定子绕组的三维模型.通过Pro/E的二次开发工具Pro/TOOLKIT,开发了可直接在UI对话框中进行参数设计的应用程序.结果显示,这种方法实现了汽轮发电机绕组参数设计的系列化,可明显缩短开发周期,并得到精确三维模型,整体上优于传统的设计方法.
|
| 关 键 词： | 计算机应用 汽轮发电机定子绕组 三维建模 参数化设计 |
| 文章编号： | 1003-0158（2007）02-0030-08 |
| 收稿时间： | 2005-12-01 |
| 修稿时间： | 2005-12-01 |
3D Modeling and Series Parameter Design of Turbo Generator Stator Coil Based on Pro/ENGINEER |
| |
| JIN Li-ping,HE Sheng-xi. 3D Modeling and Series Parameter Design of Turbo Generator Stator Coil Based on Pro/ENGINEER[J]. Journal of Engineering Graphics, 2007, 28(2): 31-38 |
| |
| Authors: | JIN Li-ping HE Sheng-xi |
| |
| Affiliation: | College of Mechanical and Electronic Engineering, China University of Geosciences, Wuhan Hubei 430074, China |
| |
| Abstract: | A method of 3D modeling and parametric design for turbo generator stator coil end-configuration is proposed.Although the turbo generator stator coil end-configuration is complicated,but the modeling mechanism is the same,so it can be modeled in same way.In this paper,3D model of turbo generator stator coils is generated by Pro/E.Furthermore,a UI dialog box is developed by Pro/TOOLKIT to implement parametric design.Result shows that this method can realize parametric design,can save design time and get precise 3D model,so it is better than traditional design method. |
| |
| Keywords: | computer application turbo generator stator coil 3D modeling parametric design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
