| 氮气硫化工艺在半钢子午线轮胎生产中的应用 |
| |
| 引用本文： | 高勇,王茂英,张皓.氮气硫化工艺在半钢子午线轮胎生产中的应用[J].轮胎工业,2012,32(2):107-111. |
| |
| 作者姓名： | 高勇 王茂英 张皓 |
| |
| 作者单位： | 赛轮股份有限公司,山东青岛,266500 |
| |
| 摘 要： | 对氮气硫化工艺和过热水硫化工艺在半钢子午线轮胎生产中的应用进行对比，并对氮气硫化工艺中出现的问题进行研究。结果表明；通过对中心机构喷嘴和喷射角度的调整，硫化胶囊上下模温差基本控制在5℃以内；通过对氮气排凝工艺的优化，缩短氮气排凝时间2／5，并使单胎耗氮量降低10％。
|
| 关 键 词： | 半钢子午线轮胎 氮气硫化 过热水硫化 温度 工艺优化 |
Application of Nitrogen Gas Curing Process in Semi-steel Radial Tire Production |
| |
| GAO Yong,WANG Mao-ying and ZHANG Hao.Application of Nitrogen Gas Curing Process in Semi-steel Radial Tire Production[J].Tire Industry,2012,32(2):107-111. |
| |
| Authors: | GAO Yong WANG Mao-ying and ZHANG Hao |
| |
| Affiliation: | (Sailun Co. ,Ltd,Qingdao 266500,China) |
| |
| Abstract: | Application of nitrogen gas curing process in semi-steel radial tire production was compared with over-heated water curing process, and the problems during the nitrogen gas curing were in- vestigated. The results showed that, through the adjustment of the nozzle and its injection angle in the center mechanism, the range of temperature changing between the upper and lower molds was controlled within 5 ℃ ,and the condensate draining time was shortened by 2/5 by optimizing the process of nitrogen condensate draining,which reduced the nitrogen consumption of one tire by 10%. |
| |
| Keywords: | semi-steel radial tire nitrogen gas curing over-heated water curing temperature process optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
