| 弹道速度信号发生器的设计 |
| |
| 引用本文： | 廖伟平 申强 李世义. 弹道速度信号发生器的设计[J]. 兵工自动化, 2006, 25(3): 31-31 |
| |
| 作者姓名： | 廖伟平 申强 李世义 |
| |
| 摘 要： | 弹道速度发生器设计以51单片机为核心,采用串口通信和D/A转换。在VB6.0界面下,数据通过串口传给单片机。单片机将数据保存在外存,通过控制电路启动D/A转换产生模拟信号,输出给解算器进行解算。存储空间和外设端口地址统一编址,软件用VB和汇编语言编程。
|
| 关 键 词： | 信号发生器 设计 速度 弹道 51单片机 D／A转换 VB6．0 串口通信 数据保存 模拟信号 |
| 收稿时间： | 2005-05-27 |
Design of Signal Generator for Trajectory Speed |
| |
| Liao WeiPing;Shen Jiang;Li ShiYi. Design of Signal Generator for Trajectory Speed[J]. Ordnance Industry Automation, 2006, 25(3): 31-31 |
| |
| Authors: | Liao WeiPing Shen Jiang Li ShiYi |
| |
| Abstract: | 51 micro-controller was used as the core of signal generator for trajectory speed in design, and serial communication and D/A conversion was adopted. Under the VB 6.0 interface, the data was transmitted to micro-controller by serial port. The data was stored into external storage by microcontroller, and D/A conversion was stared by control circuit to produce analog signals, and output the results to solver for trajectory calculation. Storage space and external port address was addressed, and VB and assembly language was used to program for the system software. |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
