首页 | 本学科首页   官方微博 | 高级检索  
     

隐极电机转子阻尼铜片漏电感的计算研究
引用本文:吴旭升,张俊洪,阳开生,马丰民. 隐极电机转子阻尼铜片漏电感的计算研究[J]. 电工技术学报, 2005, 20(5): 9-12
作者姓名:吴旭升  张俊洪  阳开生  马丰民
作者单位:武汉大学电气工程学院,武汉,430072;海军工程大学电气工程系,武汉,430033;海军工程大学电气工程系,武汉,430033;海军装备技术部,北京,100841
摘    要:一些新型电机转子阻尼绕组的端部采用与转子冲片形状相同的阻尼铜片结构,本文将该阻尼端部铜片等效为多个导线,根据任意两长直导线之间电感的基本计算公式,由等效前后电感储能不变的原则,得出了电机端部阻尼铜片漏电感的计算公式.实际计算了某隐极电机的阻尼端部漏感,利用计算结果,仿真分析了电机定子三相突然短路时的电流波形.仿真结果与试验结果相吻合,验证了所提方法的有效性.

关 键 词:隐极电机  阻尼端部  漏电感计算
修稿时间:2004-05-28

Calculation of the End Copperplate Leakage Inductance of Non-Salient Pole Machines
Wu Xusheng,Zhang Junhong,Yang Kaisheng,Ma Fengmin. Calculation of the End Copperplate Leakage Inductance of Non-Salient Pole Machines[J]. Transactions of China Electrotechnical Society, 2005, 20(5): 9-12
Authors:Wu Xusheng  Zhang Junhong  Yang Kaisheng  Ma Fengmin
Affiliation:1. Wuhan University Wuhan 430072 China 2. Naval University of Engineering Wuhan 430033 China 3. Naval Department of Equipment Beijing 100841 China
Abstract:The calculation of leakage inductance of the new type end copperplate of a round rotor machine is analyzed in this paper. Based on the basic inductance calculation formulas between two long direct wires, the leakage inductance of end copperplate is obtained by taking the end copperplate as a group of long direct wire.Using the parameter calculated, the simulation of a sudden short-circuit test of the machine was carried out. The simulation and test results prove that the formulas presented are correct.
Keywords:Round rotor machine   end of damp winding   leakage inductance calculation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号