Evaluating Energy Consumption and Efficiency of a Twin-Screw Extruder |
| |
Authors: | M. Liang H.E. Huff F.-H. Hsieh |
| |
Affiliation: | Authors Liang, Huff and Hsieh are with the Department of Biological Engineering, University of Missouri, Columbia, MO 65211. Direct inquiries to author Hsieh (). |
| |
Abstract: | ABSTRACT: Using the results from twin-screw extrusion of corn meal, both energy consumption and extruder efficiency were found to be significantly correlated with screw speed and specific feeding load (SFL). An increase in the SFL decreased the total specific mechanical energy, but increased the extruder efficiency. SFL influenced the extruder efficiency more than the screw speed. Increasing the screw speed from 300 to 450 rpm at a constant SFL level increased the extruder efficiency by 6 to 11%, whereas an increase of SFL from 0.0026 to 0.0038 kg rev 1 raised the extruder efficiency by 30%. Of the mechanical energy consumed per unit mass of extrudate, over 98% were used for shearing or viscous dissipation and less than 1.5% were for pumping during twin-screw extrusion of corn meal. |
| |
Keywords: | extrusion energy consumption efficiency corn meal |
|
|