首页 | 本学科首页   官方微博 | 高级检索  
     

多组分乙烯氧氯化制氯乙烯催化剂的研制
引用本文:刘丽芝,赵文涛,蒲延芳,闻学兵. 多组分乙烯氧氯化制氯乙烯催化剂的研制[J]. 工业催化, 2010, 18(2): 30-32. DOI: 10.3969/j.issn.1008-1143.2010.02.07
作者姓名:刘丽芝  赵文涛  蒲延芳  闻学兵
作者单位:北京三聚环保新材料股份有限公司,北京,100080;北京三聚环保新材料股份有限公司,北京,100080;北京三聚环保新材料股份有限公司,北京,100080;北京三聚环保新材料股份有限公司,北京,100080
摘    要:开发了负载第二组分K和第三组分为稀土金属的多组分乙烯氧氯化制氯乙烯催化剂。反应条件为:反应温度220℃,反应压力0.3MPa,原料n(C_2H_4)∶n(HCl)∶n(O_2)=1.04∶2∶0.57。在添加第二组分K的最佳质量分数0.6%~0.9%和添加第三组分Ce或La的最佳质量分数0.4%~0.6%的条件下,HCl转化率大于99.5%,二氯乙烷选择性大于99.3%。

关 键 词:催化剂工程  乙烯氧氯化  氯乙烯  多组分催化剂

Development of a multi-component catalyst for ethylene oxychlorination to vinyl chloride
LIU Lizhi,ZHAO Wentao,PU Yanfang,WEN Xuebing. Development of a multi-component catalyst for ethylene oxychlorination to vinyl chloride[J]. Industrial Catalysis, 2010, 18(2): 30-32. DOI: 10.3969/j.issn.1008-1143.2010.02.07
Authors:LIU Lizhi  ZHAO Wentao  PU Yanfang  WEN Xuebing
Affiliation:Beijing SJ Environmental Protection and New Material Co.,Ltd., Beijing 100080, China
Abstract:A multi-component catalyst for ethylene oxychlorination to vinyl chloride was developed by introduction of a second component (K) and a third component (rare earth). The reaction condition ethylene oxychlorlnation to vinyl chloride was as follows: reaction temperature 220 ℃, reaction pressure 0.3 MPa, n( C2H4 ): n(HCl) : n( O2 ) = 1.04: 2: 0.57. HCl conversion of over 99.5% and selectivity to ethylene dichloride of over 99.3% were obtained under above condition over the catalyst with optimal K content of 0.6% -0.9% (mass fraction) and optimal Ce or La content of 0.4% -0.6%.
Keywords:catalyst engineering  ethylene oxychlorination  vinyl chloride  muhi-component catalyst
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号