| 热模锻压力机离合器和制动器的设计 |
| |
| 引用本文： | 张东辉,艾淑萍.热模锻压力机离合器和制动器的设计[J].一重技术,2009(2):18-20. |
| |
| 作者姓名： | 张东辉 艾淑萍 |
| |
| 作者单位： | 1. 中国第一重型机械(集团)有限公司,黑龙江,富拉尔基,161042
2. 一重集团大连设计研究院,辽宁,大连,116600 |
| |
| 摘 要： | 在以往的热模锻压力机设计中常采用盘式离合器与浮动镶块式制动器配合的形式,扭矩传递大,其结构复杂,重量大,装卸和调整都不便。因此,对于小型压力机并不适合。
|
| 关 键 词： | 热模锻压力机 浮动镶块 离合器 制动器 |
Design of Clutch and Brake of Hot-die Forging Press |
| |
| Zhang Donghui,Ai Shuping.Design of Clutch and Brake of Hot-die Forging Press[J].CFHI Technology,2009(2):18-20. |
| |
| Authors: | Zhang Donghui Ai Shuping |
| |
| Affiliation: | Zhang Donghui,Ai Shuping |
| |
| Abstract: | For the hot-die forging press,the old design is in the form of disk clutch combined with suspension inserted block type brake,whick has shortcomings of big torque transmit,complicated structure and iconvenient mount/demount and adjustment.Therfore,it＇s not suitable for small press. |
| |
| Keywords: | hot-die forging press SuspenSion inserted block clutch and brake |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
