| 碳四物料加氢后作为裂解原料的可行性研究 |
| |
| 引用本文： | 刘淑芝,何宗华,彭光辉,康秀红.碳四物料加氢后作为裂解原料的可行性研究[J].齐鲁石油化工,2010,38(2):81-83. |
| |
| 作者姓名： | 刘淑芝 何宗华 彭光辉 康秀红 |
| |
| 作者单位： | 中国石化齐鲁分公司研究院,山东淄博,255400 |
| |
| 摘 要： | 在实验室考察了某碳四物料饱和加氢后作为裂解原料的可行性。结果表明,在温度60～80℃,压力2.0MPa,氢烯摩尔比2.0～3.0,空速3.0 h-1下,加氢后碳四中烯烃含量(w)小于1%;模拟轻烃裂解炉,裂解乙烯收率达到34%,丙烯收率达到18%。
|
| 关 键 词： | 碳四 加氢 裂解 乙烯 |
FEASIBILITY STUDY ON C4 HYDROGENATION AS CRACKING FEEDSTOCK |
| |
| Liu Shuzhi,He Zonghua,Peng Guanghui,Kang Xiuhong.FEASIBILITY STUDY ON C4 HYDROGENATION AS CRACKING FEEDSTOCK[J].Qilu Petrochemical Technology,2010,38(2):81-83. |
| |
| Authors: | Liu Shuzhi He Zonghua Peng Guanghui Kang Xiuhong |
| |
| Affiliation: | Liu Shuzhi,He Zonghua,Peng Guanghui,Kang Xiuhong (Research Institute of Qilu Branch Co.,SINOPEC,Zibo,Shandong,255400) |
| |
| Abstract: | Feasibility study on products from some C4 saturation hydrogenation as cracking feedstock was made in laboratory.The results show that olefin content in C4 hydrogenation products is lower than 1% under the conditions of reaction temperature at 60～80℃,reaction pressure 2.0MPa,mole ratio of hydrogen to olefin at 2.0～3.0,space rate at 3.0h-1.In the simulating light hydrocarbon cracking furnace,ethylene yield reaches 34% and propylene yield does 18% under the reasonable cracking conditions. |
| |
| Keywords: | C4 hydrogenation cracking ethylene |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
