首页 | 本学科首页   官方微博 | 高级检索  
     

2205DSS焊接接头腐蚀疲劳性能分析
引用本文:王智祥,张瑶,张继祥.2205DSS焊接接头腐蚀疲劳性能分析[J].焊接学报,2014,35(5):67-70.
作者姓名:王智祥  张瑶  张继祥
作者单位:1.重庆交通大学船舶工程中心, 重庆 400074
基金项目:重庆市科委重大科技攻关资助项目(ests2008ab3033)
摘    要:对川东船厂制造化学品船所用的国产2205DSS常用焊接接头在模拟海水环境中的腐蚀疲劳性能进行了试验研究.通过Origin软件对试验数据进行非线性拟合得到了环境温度分别在24,30和40℃、加载应力比为0.1、加载频率为20 Hz条件下的腐蚀疲劳寿命S-N曲线,得到焊接接头在该环境下的疲劳极限,建立了有温度参数表示的S-N数学模型.结果表明,在模拟海水中焊接接头发生腐蚀疲劳断裂的位置在母材区,环境温度升高对低应力水平作用下的试件疲劳寿命有明显影响.

关 键 词:双相不锈钢    腐蚀疲劳    S-N曲线
收稿时间:2012/10/10 0:00:00

Corrosion fatigue performance of 2205 DSS welded joints
WANG Zhixiang,ZHANG Yao and ZHANG Jixiang.Corrosion fatigue performance of 2205 DSS welded joints[J].Transactions of The China Welding Institution,2014,35(5):67-70.
Authors:WANG Zhixiang  ZHANG Yao and ZHANG Jixiang
Affiliation:1.Marine Engineering Center, Chongqing Jiaotong University, Chongqing 400074, China2.Electromechanical and Automotive Engineering School, Chongqing Jiaotong University, Chongqing 400074, China
Abstract:The corrosion fatigue performance of welded joints of homemade 2205 duplex stainless steel (DSS) has been studied in simulated seawater environment. The S-N curves of corrosion fatigue life were obtained at different environment temperatures of 24,30 and 40℃,as the stress ratio is 0.1 and the loading frequency is 20 Hz. The experimental data shows that the low stress level had a significant effect on the fatigue life as environment temperature rising. Then an S-N mathematical model with temperature was established and welded joint fatigue limit was obtained in simulated seawater environment.
Keywords:2205 duplex stainless steel  corrosion fatigue  S-N curve
本文献已被 CNKI 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号