首页 | 本学科首页   官方微博 | 高级检索  
     

半连续铸造AlCu/Al梯度合金的高温退火研究
引用本文:张卫文,李元元,温利平,张文.半连续铸造AlCu/Al梯度合金的高温退火研究[J].金属热处理,2002,27(5):6-8.
作者姓名:张卫文  李元元  温利平  张文
作者单位:华南理工大学,机电工程系,广州,510640
基金项目:国家自然科学基金 (5990 50 0 7),广东省自然科学基金(9942 50 )
摘    要:采用双流浇注半连续铸造方法获得了AlCu/Al梯度合金。研究了合金高温退火处理后的组织和性能变化。结果表明 ,高温退火后合金的洛氏硬度比铸态时显著降低但仍保持明显的梯度分布 ,并且在铸件横截面中心位置硬度降低幅度小 ,靠铸件表面区域降低幅度大。高温退火处理后 ,AlCu/Al梯度合金仍能保持宏观上铜含量的梯度分布与铸态时无明显的差别。

关 键 词:半连续铸造  AlCu/Al梯度合金  高温退火
文章编号:0254-6051(2002)05-0006-03
修稿时间:2001年8月30日

High Temperature Annealing of AlCu/Al Gradient Alloy Prepared by Semi-Continuous Casting
ZHANG Wei-wen,LI Yuan-yuan,WEN Li-ping,ZHANG Wen.High Temperature Annealing of AlCu/Al Gradient Alloy Prepared by Semi-Continuous Casting[J].Heat Treatment of Metals,2002,27(5):6-8.
Authors:ZHANG Wei-wen  LI Yuan-yuan  WEN Li-ping  ZHANG Wen
Abstract:A novel AlCu/Al gradient material was fabricated by semi-continuous casting using double-stream-pouring technique.The microstructures and property of the alloy annealed at high temperature were investigated.The results show that the Rockwell hardness decreases remarkably and the gradient distribution of the hardness value in cross section maintains after high temperature annealing.On the contrary,the copper distribution of the alloy annealed at high temperature for a long time has no obvious change from that of the alloy in as-cast state.
Keywords:semi-continuous casting  AlCu/Al gradient material  high temperature annealing
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号