Design and fabrication of low cost solar water heaters

We designed two types of very low cost solar water heaters which do not need a water supply connection. The first one consisted of two plastic bowls, one inside the other with 5 cm thickness of insulation in between. A transparent plastic cover was tied around the smaller vessel. It was found that water placed inside the smaller vessel had its temperature raised by 18°C from the ambient temperature within four hours when the average insolation was about 600 kWh/m². The second one consisted of two earthen vessels in place of plastic bowls. The water temperature rise was 20°C under the same radiation. If either of the heaters was covered with cotton-wool insulation in the afternoon, the temperature remains 13°C above the ambient early next morning. The cost of the material was around US$ 4.50 for the plastic bowl heater while this is around US$ 3.50 for the earthen vessel water heater.