| 基于FLUENT的管壳式换热器壳程流场数值模拟研究 |
| |
| 引用本文： | 付磊,付丽娅,唐克伦,文华斌,李良.基于FLUENT的管壳式换热器壳程流场数值模拟研究[J].四川轻化工学院学报,2012(3):17-21. |
| |
| 作者姓名： | 付磊 付丽娅 唐克伦 文华斌 李良 |
| |
| 作者单位： | [1]四川理工学院机械工程学院,四川自贡643003 [2]贵州华阳宏达电器有限公司,贵阳550009 |
| |
| 基金项目： | 基金项目：国家“十一五”科技支撑计划项目（2008BADC4815）;过程装备与控制工程四川省高校重点实验室项目（GKYJ201101,GK200907）;四川省教育厅科研项目（10ZB097）;四川理工学院博士启动基金（2010zy019） |
| |
| 摘 要： | 利用ANSYS参数化建模方法建立了管壳式换热器的参数化模型，在ANSYSFLUENT中对管壳式换热器壳程流体的流动与传热进行了数值模拟计算，得到换热器壳程流体温度场、速度场和压力场；分析了折流板间距及弦高对换热效率和壳程流体压降的影响，对于设计传热效率高、流体阻力小的换热器进行了有益探索。
|
| 关 键 词： | FLUENT 管壳式换热器 壳程流场 传热 数值模拟 |
Numerical Simulation Study of Shell-Side Fluid in Shell-and-Tube Heat Exchanger Through FLUENT |
| |
| FU Lei,FU Li-ya,TANG Ke-lun,WEN Hua-bing,LI Liang.Numerical Simulation Study of Shell-Side Fluid in Shell-and-Tube Heat Exchanger Through FLUENT[J].Journal of Sichuan Institute of Light Industry and Chemical Technology,2012(3):17-21. |
| |
| Authors: | FU Lei FU Li-ya TANG Ke-lun WEN Hua-bing LI Liang |
| |
| Affiliation: | School of Mechanical Engineering, Sichuan University of Science ＆ Engineering, Zigong 643000, 2. Guizhou Huayang Hongda Electric Appliance Co. ,Ltd. Guiyang550009 ,China) |
| |
| Abstract: | A parametric model on the shell and tube heat exchanger is established by using ANSYS parametric modeling method. The numerical simulation on the shell-side fluid flow and heat transfer of shell and tube heat exchanger is performed on ANSYS FLUENT, and Shell-side fluid temperature field, velocity field and pressure field are acquired;and the effects of the baffle plate spacing and string height of heat exchanger to the heat transfer efficiency and shell side fluid pressure drop is analyzed. It is a beneficial exploration to the design to high heat transfer efficiency and low fluid resistance of the heat exchanger. |
| |
| Keywords: | FLUENT shell-and-tube heat exchanger shell-side fluid heat transfer numerical simulation |
| 本文献已被 维普 等数据库收录！ |
