| 高密度环氧泡沫塑料的制备工艺及性能研究 |
| |
| 引用本文： | 张聪莉,郑水蓉,李铁虎,陈欢庆,孙曼灵.高密度环氧泡沫塑料的制备工艺及性能研究[J].热固性树脂,2009,24(6):30-33. |
| |
| 作者姓名： | 张聪莉 郑水蓉 李铁虎 陈欢庆 孙曼灵 |
| |
| 作者单位： | 1. 西北工业大学理学院应用化学系,陕西西安,710072
2. 西北工业大学材料学院,陕西西安,710072 |
| |
| 摘 要： | 制备了只加入空心玻璃微珠及含有发泡剂与空心玻璃微球的2种环氧泡沫塑料。通过DSC分析研究了2种泡沫塑料的固化工艺,玻璃微珠加入量对体系的物理力学性能影响。结果表明,2种体系较佳的固化工艺分别为70℃/3 h和60℃/1 h+100℃/2 h。随着玻璃微珠添加量的增加,填充型泡沫塑料的密度和力学性能下降。发泡剂和空心玻璃微珠共用可制备高密度(0.6~0.7 g/cm3)环氧泡沫塑料。
|
| 关 键 词： | 环氧泡沫塑料 高密度 固化工艺 力学性能 |
Study on production process and performance of high-density epoxy foam |
| |
| ZHANG Cong-li,ZHENG Shui-rong,LI Tie-hu,CHEN Huan-qing,SUN Man-ling.Study on production process and performance of high-density epoxy foam[J].Thermosetting Resin,2009,24(6):30-33. |
| |
| Authors: | ZHANG Cong-li ZHENG Shui-rong LI Tie-hu CHEN Huan-qing SUN Man-ling |
| |
| Abstract: | Two epoxy foam with hollow glass beads only and combined use of glass beads and foaming agent were prepared.The curing processes of the two systems were investigated by DSC.The effect of the glass beads contens on the mechanical properties were also studied.The results showed that the two optimal curing processes were 70 ℃/3 h and 60 ℃/1 h+100 ℃/2 h respectively.The density and mechanical properties were decreased with the contens of glass beads increasing.The high-density(0.6-0.7 g/cm3)epoxy foam could be prepared by using glass beads and foaming agent. |
| |
| Keywords: | epoxy foam high-density curing process mechanical property |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
