| Abstract: | This research explores the potential of using exfoliated graphite nanoplatelets, xGnP, as the reinforcement in high density polyethylene (HDPE). Two kinds of xGnP nanoparticles were used; xGnP‐1 has the thickness of 10 nm and a platelet diameter of 1 μm, whereas xGnP‐15 has the same thickness but the diameter is around 15 μm. HDPE/xGnP nanocomposite were fabricated first by melt blending and then followed by injection molding. The HDPE/xGnP nanocomposite's flexural strength, modulus and impact strength were evaluated and compared with composites filled with commercial reinforcements such as carbon fibers (CF), carbon black (CB) and glass fibers (GF). Polymer nanocomposites from HDPE/xGnP are equivalent in flexural stiffness and strength to HDPE composites reinforced with glass fibers and carbon black but slightly less than that of HDPE/carbon fiber composites at the same volume fraction. However, the Izod impact strength of HDPE/xGnP nanocomposites is significantly greater (∼250%) than all other reinforcements at the same volume fractions. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers |
