| Abstract: | Injection‐compression molding (ICM) has received increased attention because of its advantages over conventional injection molding (CIM). This article aims to investigate the effects of five dominating ICM processing parameters on fiber orientation in short‐fiber‐reinforced polypropylene (SFR‐PP) parts. A five‐layer structure of fiber orientation is found across the thickness under most conditions in ICM parts. This is quite different from the fiber orientation patterns in CIM parts. The fibers orient orderly along the flow direction in the shell region, whereas most fibers arrange randomly in the skin and the core regions. Additionally, the fiber orientation changes in the width direction, with most fibers arranging orderly along the flow direction at positions near the mold cavity wall. The results also show that the compression force, compression distance, and compression speed play important roles in determining the fiber states. Thicker shell regions, in which most fibers orient remarkably along the flow direction, can be obtained under larger compression force or compression speed. Moreover, the delay time has an obvious effect on the fiber orientation at positions far from the gate. However, the effect of compression time is found to be negligible. POLYM. COMPOS., 31:1899–1908, 2010. © 2010 Society of Plastics Engineers. |
