Topology optimization with multiple materials via moving morphable component (MMC) method |
| |
Authors: | Weisheng Zhang Junfu Song Jianhua Zhou Zongliang Du Yichao Zhu Zhi Sun Xu Guo |
| |
Affiliation: | State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, International Research Center for Computational Mechanics, Dalian University of Technology, Dalian, China |
| |
Abstract: | With the fast development of additive manufacturing technology, topology optimization involving multiple materials has received ever increasing attention. Traditionally, this kind of optimization problem is solved within the implicit solution framework by using the Solid Isotropic Material with Penalization or level set method. This treatment, however, will inevitably lead to a large number of design variables especially when many types of materials are involved and 3‐dimensional (3D) problems are considered. This is because for each type of material, a corresponding density field/level function defined on the entire design domain must be introduced to describe its distribution. In the present paper, a novel approach for topology optimization with multiple materials is established based on the Moving Morphable Component framework. With use of this approach, topology optimization problems with multiple materials can be solved with much less numbers of design variables and degrees of freedom. Numerical examples provided demonstrate the effectiveness of the proposed approach. |
| |
Keywords: | moving morphable component (MMC) multiple material sensitivity analysis topology optimization |
|
|