首页 | 本学科首页   官方微博 | 高级检索  
     

激光感生击穿光谱技术测量飞灰含碳量
引用本文:吴戈,陆继东,余亮英,陈文. 激光感生击穿光谱技术测量飞灰含碳量[J]. 热能动力工程, 2005, 20(4): 365-368
作者姓名:吴戈  陆继东  余亮英  陈文
作者单位:华中科技大学,煤燃烧国家重点实验室,湖北,武汉,430074
基金项目:高等学校博士学科点专项科研基金资助项目(20020487013),国家科技合作重点基金资助项目(2001CB711203)
摘    要:介绍了激光感生击穿光谱技术(LIBS)的原理及应用现状,并且给出了利用激光感生击穿光谱技术测量飞灰含碳量的方法与分析结果。选用煤种是焦作无烟煤,通过快速灰化法得到含碳量在0.5%~7.0%之间的飞灰样品。利用LIBS技术测量飞灰的含碳量,并且与传统的重量燃烧法测量得到的飞灰样品的含碳量进行比较。结果表明两种测量方法的结果吻合得很好。

关 键 词:激光感生击穿光谱 等离子体 定标 飞灰含碳量
文章编号:1001-2060(2005)04-0365-04

The Measurement of Carbon Content in Fly Ash by Laser-induced Breakdown Spectroscopy
WU Ge,LU Ji-dong,YU Liang-ying,et al. The Measurement of Carbon Content in Fly Ash by Laser-induced Breakdown Spectroscopy[J]. Journal of Engineering for Thermal Energy and Power, 2005, 20(4): 365-368
Authors:WU Ge  LU Ji-dong  YU Liang-ying  et al
Abstract:The theory of laser-induced breakdown spectroscopy (LIBS) and its present status of application potential are described and the measurement of carbon content in fly ash by using this method and results of analysis presented. The rank of coal selected is Jiaozuo anthracite. By a method of rapid incineration fly ash samples with carbon content ranging from 0.5% to 7.0% were obtained. The measurement of carbon content in fly ash by using LIBS technique was compared with the carbon content in fly ash samples measured through the use of traditional weight combustion method. The results of the two measurement methods are in very good agreement.
Keywords:laser-induced breakdown spectroscopy   plasma   calibration   carbon content of fly ash
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《热能动力工程》浏览原始摘要信息
点击此处可从《热能动力工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号