首页 | 本学科首页   官方微博 | 高级检索  
     

80t顶底复合吹炼转炉的冶金效果
引用本文:郑颖,蒋宏,周虹,佟溥翘,李素霞.80t顶底复合吹炼转炉的冶金效果[J].钢铁研究学报,2001,13(5):11-14.
作者姓名:郑颖  蒋宏  周虹  佟溥翘  李素霞
作者单位:1. 包头钢铁集团公司炼钢厂 内蒙古包头 014010
2. 钢铁研究总院 北京 100081
摘    要:对比了包头钢铁(集团)公司炼钢厂80t顶底复合吹炼转炉和顶吹氧化转炉的冶金效果,结果表明,底吹气体对钢水的搅拌作远大于顶吹氧化。采用顶底复合吹炼工艺后,不仅钢水成分和温度更均匀,吹炼更平稳,而且钢水终点残余锰点含量提高。由于吹炼时间、氧化消耗量及炉渣中的FeO含量都有所降低,因此金属收得率提高,另外,通过适当提高炉渣碱度,该工艺还可取得较好的脱磷效果。

关 键 词:炼钢  顶底复合吹炼  转炉  冶金效果
文章编号:1001-0963(2001)05-0011-04
修稿时间:2000年10月13

Metallurgical Effect of 80 t Combined Blowing Oxygen Converter
ZHENG Ying ,JIANG Hong ,ZHOU Hong ,TONG Pu qiao ,LI Su xia . Baotou Iron and Steel.Metallurgical Effect of 80 t Combined Blowing Oxygen Converter[J].Journal of Iron and Steel Research,2001,13(5):11-14.
Authors:ZHENG Ying  JIANG Hong  ZHOU Hong  TONG Pu qiao  LI Su xia [ Baotou Iron and Steel
Abstract:The metallurgical effects of 80 t top blowing and combined blowing oxygen converters at Baotou Iron and Steel Co have been investigated. The stirring intensity of bottom blowing is greater than that of top blowing. The content and temperature of molten metal are homogeneous, and smelting process is stable for combined blowing oxygen converter. Decreasing of blowing oxygen time, oxygen consumption and FeO content in slag can increases yield of metal. In addition, the content of remained Manganese increases. High efficiency of dephosphorization can be obtained by increasing properly basicity of slag.
Keywords:steelmaking  combined blowing oxygen  converter  metallurgical effect
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号