| 基于自顶向下的起重机主梁参数化设计 |
| |
| 引用本文： | 侯志利,王宗彦,王建政,李晓宏.基于自顶向下的起重机主梁参数化设计[J].机电产品开发与创新,2005,18(1):89-90,105. |
| |
| 作者姓名： | 侯志利 王宗彦 王建政 李晓宏 |
| |
| 作者单位： | 1. 中北大学,机械工程系CAD/CAM研究室,山西,太原,030051
2. 太原重型机械集团有限公司技术中心,山西,太原,030024 |
| |
| 摘 要： | 论述了参数化设计的思想,介绍了基于参数化技术的自顶向下设计的过程和实施方法,并以三维设计软件SolidWorks为平台,采用Visual Basic开发语言,结合桥式起重机主梁设计实例,实现了自顶向下的零部件设计过程。此设计方法可显著提高设计效率与质量,快速响应个性化的市场要求。
|
| 关 键 词： | 参数化 自顶向下 布局草图 主梁设计 |
| 文章编号： | 1002-6673(2005)01-089-03 |
The Parametric Design for Main Girder of Chain Block Based on Top-down |
| |
| HOU Zhi-Li,WANG Zong-Yan,WANG Jian-Zheng,LI Xiao-Hong.The Parametric Design for Main Girder of Chain Block Based on Top-down[J].Development & Innovation of Machinery & Electrical Products,2005,18(1):89-90,105. |
| |
| Authors: | HOU Zhi-Li WANG Zong-Yan WANG Jian-Zheng LI Xiao-Hong |
| |
| Affiliation: | HOU Zhi-Li~1,WANG Zong-Yan~1,WANG Jian-Zheng~2,LI Xiao-Hong~2 |
| |
| Abstract: | Base on parametric technology, the design method and design process by top-down is presented in this paper. With the 3D parametric design software SolidWorks, the Assembly for girder of chain block has been finished successfully in the actual application. The interface between model and parameter has been established with the programming language of Microsoft Visual Basic. It has been proved that this way can improve design efficiency and quality sharply, and therefore will meet specific market need rapidly. |
| |
| Keywords: | parametric top-down layout the design for girder |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
