首页 | 本学科首页   官方微博 | 高级检索  
     

异步起动永磁同步电动机实验分析与探讨
引用本文:李红,邱小华,王中泉. 异步起动永磁同步电动机实验分析与探讨[J]. 电机技术, 2010, 0(2): 37-39
作者姓名:李红  邱小华  王中泉
作者单位:1. 广东工业大学信息学院,510006
2. 广东美芝制冷设备有限公司,528333
摘    要:介绍了2极2.45kW异步起动永磁同步电动机的设计与试验结果,重点阐述了定子齿磁密和轭磁密之间的关系,提出了控制定子齿磁密和轭磁密,减小铁心损耗、减小铁心损耗设计值和试验值的误差的方法。结果铁心损耗与机械损耗之和从288W减小到69W,铁心损耗与机械损耗之和的设计值与试验值的误差从181.8%减小到11.6%。

关 键 词:异步起动永磁同步电动机  铁心损耗  误差  齿磁密  轭磁密

Test and Analysis of Line-start Permanent Magnet Synchronous Motors
LI Hong,Qiu Xiaohua,Wang Zhongquan. Test and Analysis of Line-start Permanent Magnet Synchronous Motors[J]. Electrical Machinery Technology, 2010, 0(2): 37-39
Authors:LI Hong  Qiu Xiaohua  Wang Zhongquan
Affiliation:Li Hong Qiu Xiaohua Wang Zhongquan( Faculty of Information Egineering, Guangdong University of Technology Guangdong Meizhi Compressor Limited )
Abstract:The design and the test of a line-start permanent magnet synchronous motor of 2-pole 2.45kW was introduced. The relationship of the tooth flux density and the yoke flux density of the motor was analyzed. A method was presented to control the tooth flux density and the yoke flux density in order to reduce the iron loss and the error, which was demonstrated by test results. The sum of iron loss and mechanical loss of the motor was decreased from 288W to 69W while the corresponding error was reduced from 181.8% to 11.6%.
Keywords:Line-start permanent magnet synchronous motor Iron loss Error Tooth flux density Yoke flux density
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号