|
|||||
|
|
| 螺杆压缩机壳体(HT200)内腔化学镀Ni-P合金 | |
| 引用本文： | 吴蒙华,魏小鹏,王智明,戴连森,隋敬春. 螺杆压缩机壳体(HT200)内腔化学镀Ni-P合金[J]. 腐蚀与防护, 2003, 24(4): 158-161 |
| 作者姓名： | 吴蒙华 魏小鹏 王智明 戴连森 隋敬春 |
| 作者单位： | 1. 大连冰山集团有限公司博士后工作站,大连,116033;大连大学,大连,116622 2. 大连大学,大连,116622 3. 大连冰山集团有限公司博士后工作站,大连,116033 |
| 摘 要： | 以材料为HT200的螺杆压缩机壳体为对象，在实验的基础上，分析化学镀Ni-P合金过程中，络合剂种类、稳定剂的含量、pH值、活化处理及后处理等对镀层耐蚀性、含磷量、结合力、表面形貌等的影响规律。对镀层的物理、化学性能检测结果表明，获得的镀层性能良好。 |
| 关 键 词： | 化学镀 Ni－P合金 螺杆压缩机 壳体内腔 |
| 文章编号： | 1005-748X(2003)04-0158-04 |
| 修稿时间： | 2002-09-17 |
ELECTROLESS Ni-P ALLOY PLATING TECHNOLOGY APPLIED TO INNER SURFACE OF SCREW COMPRESSOR SHELL |
|
| WU Meng hua ,,WEI Xiao peng ,WANG Zhi ming ,DAI Lian sen ,SUI Jing chun. ELECTROLESS Ni-P ALLOY PLATING TECHNOLOGY APPLIED TO INNER SURFACE OF SCREW COMPRESSOR SHELL[J]. Corrosion & Protection, 2003, 24(4): 158-161 | |
| Authors: | WU Meng hua WEI Xiao peng WANG Zhi ming DAI Lian sen SUI Jing chun |
| Affiliation: | WU Meng hua 1,2,WEI Xiao peng 2,WANG Zhi ming 1,DAI Lian sen 1,SUI Jing chun 1 |
| Abstract: | Based on experiments for screw compressor shell made of material HT200, the influences of the compound agent type, stabilizer content, pH value, activation and post treatment employed in electroless Ni P alloy plating process on corrosion resistance, P content, cohesion, surface morphology of the coating were analyzed. The physical and chemical examination showed that the coating had good properties. |
| Keywords: | Electroless plating Ni P Alloy Screw compressor Inner surface of shell |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |