首页 | 本学科首页   官方微博 | 高级检索  
     

基于MEMS微加速度计的振动测试仪
引用本文:曾勇,杨涛,岳高铭. 基于MEMS微加速度计的振动测试仪[J]. 传感器与微系统, 2007, 26(6): 75-76,89
作者姓名:曾勇  杨涛  岳高铭
作者单位:西南科技大学,信息工程学院,四川,绵阳,621010
基金项目:国防科技应用基础研究基金
摘    要:采用16位单片机MSP430、微加速度计ADXL203及射频收发芯片nRF2401设计制作了一种微型振动测试仪。采用ADXL203检测振动,输出与加速度大小成比例关系的电压信号经滤波、放大、A/D转换等处理后转换为单片机能识别的数字信号,信号经处理器处理后,通过nRF2401发送至PC机显示,并以加速度曲线的形式显示。重点研究了低功耗的轻巧敏感元件ADXL203的振动信号的检测和调理、中断方式下的A/D采样以及nRF2401的射频通信,并通过振动测试试验验证了设计的正确性,该方案适用于低功耗、微型化、网络化的振动测试。

关 键 词:微加速度计  微型振动仪  低功耗
文章编号:1000-9787(2007)06-0075-02
修稿时间:2006

Vibrometer based on MEMS microaccelerometer
ZENG Yong,YANG Tao,YUE Gao-ming. Vibrometer based on MEMS microaccelerometer[J]. Transducer and Microsystem Technology, 2007, 26(6): 75-76,89
Authors:ZENG Yong  YANG Tao  YUE Gao-ming
Affiliation:School of Informantion Engineering, Southwest University of Science and Technology, Mianyang 621010 , China
Abstract:A microvibrometer with 16-bit MCU MSP430, microaccelerometer ADXL203 and nRF2401 is developed. ADXL203 is used to detect vibration signal of objects under test . The output signal is analog voltage proportional to acceleration. Through filtration, amplification and A/D conversion, the weak analog signal is transformed to binary signal, which can be recognized by MCU. nRF2401 sends the signal processed by MCU to PC to display acceleration curve. The research focuses on testing the vibration signal of small low-power sensitive component ADXL203, A/D sampling based on interruption and signal transmission using nRF2401 ,the correction of the design is proved by the experiment of vibration test, and the project is adapted to low power, mini-size, networking vibration test.
Keywords:microaccelerometer   microvibrometer   low-power
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号