Noise cancellation of ultrasonic NDE signals using blind source separation

This paper proposes a new denoising method for ultrasonic NDE (nondestructive evaluation) signals using blind separation (BSS) technology. The proposed denoising method consists of four steps. First, a reconstructed phase space (RPS) is constructed from observed ultrasonic NDE signals. The information about the underlying sources (e.g., ultrasonic signal, noise, etc.) acting on this system is contained in this RPS. Second, independent component analysis (ICA) is performed on the RPS to recover all sources underlying the RPS. Next, the ultrasonic signal component is selected by a decision criterion related to the denoising application and, finally, is reconstructed to obtain the denoised ultrasonic signal. To validate the proposed method, it has been applied to the experimental ultrasonic NDE signals of the test sample and is compared with the wavelet denoising method in SNR (signal-to-noise ratio) enhancement. The experimental results show that the SNR of the ultrasonic NDE signals can be enhanced greatly using the proposed denoising method and the proposed method has almost the same denoising performance as the wavelet denoising method in SNR enhancement. A trait of the proposed denoising method is the ability to denoise ultrasonic NDE signals by separating the ultrasonic signal and noise using blind source separation technology. The text was submitted by the authors in English.