首页 | 本学科首页   官方微博 | 高级检索  
     

一种新的超宽带脉冲波形设计方法
引用本文:顾真松,陈佳栋,缪翔.一种新的超宽带脉冲波形设计方法[J].现代电子技术,2008,31(11):66-68.
作者姓名:顾真松  陈佳栋  缪翔
作者单位:南京邮电大学通信与信息工程学院,江苏,南京,210003
摘    要:首先介绍了UWB成形脉冲的算法,然后基于Hermite矩阵和Chirp信号得到了UWB的成形脉冲。在对Chirp脉冲的带宽、中心频率等性能参数比较分析的基础上,将若干个Chirp脉冲信号进行线性叠加,通过仿真结果表明,随之产生的脉冲信号不仅满足FCC对UWB脉冲信号辐射功率要求,而且其脉冲信号的频谱利用率也很高,同时还能有效抑制对其他窄带系统的干扰。

关 键 词:超宽带  成形脉冲  功率谱密度  Chirp信号  组合波形
文章编号:1004-373X(2008)11-066-03
修稿时间:2007年12月19

A Novel Method to Generate UWB Shape Impulse
GU Zhensong,CHEN Jiadong,MIAO Xiang.A Novel Method to Generate UWB Shape Impulse[J].Modern Electronic Technique,2008,31(11):66-68.
Authors:GU Zhensong  CHEN Jiadong  MIAO Xiang
Abstract:In this paper,an algorithm of the UWB shaping pulse is discussed.Based on the comparison and analysis of the performance parameters of the Chirp pulse,including bandwidth and central frequency,a linear combination of several Chirp pulse signals is proposed by using Hermite matrix.The simulation result shows that the Power Spectral Density(PSD) of the produced pulse is not only according with the Federal Communications Commission(FCC),but also enjoys a high spectrum utilization ratio.Meanwhile,the pulse can suppress the interference from UWB system to other narrowband systems effectively.
Keywords:UWB  shaping pulse  PSD  Chirp signal  combination waveform
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号