| PCD和硬质合金刀具车削钛基复合材料时刀具磨损特征研究 |
| |
| 引用本文： | 宦海祥,徐九华,苏宏华,傅玉灿,梁星慧,葛英飞.PCD和硬质合金刀具车削钛基复合材料时刀具磨损特征研究[J].中国机械工程,2016,27(14):1877. |
| |
| 作者姓名： | 宦海祥 徐九华 苏宏华 傅玉灿 梁星慧 葛英飞 |
| |
| 作者单位： | 1.南京航空航天大学，南京，210016
2.盐城工学院，盐城，224051
3.上海航天精密机械研究所，上海，201600
4.南京工程学院，南京，211167 |
| |
| 基金项目： | 国家自然科学基金资助项目（51275227）；上海航天科技创新基金资助项目（SAST201326）；江苏省普通高校研究生科研创新计划资助项目（CXLX11_0175) |
| |
| 摘 要： | 以原位生成晶须和颗粒混合增强钛基复合材料为车削对象，在切削速度为60~120m/min的条件下，对聚晶金刚石（PCD）和硬质合金刀具开展了车削性能试验研究。研究表明，PCD刀具的切削力为硬质合金刀具的77%～88%，其切削温度为硬质合金刀具的65%～82%。无论是高速切削，还是低速切削，PCD刀具都经历初期剧烈磨损而后稳定磨损的过程，而硬质合金刀具仅有急剧磨损的过程。刀具磨损特征方面，PCD刀具主要发生磨粒磨损和黏结磨损，硬质合金刀具主要发生月牙洼磨损、黏结磨损和扩散磨损。
|
| 关 键 词： | 钛基复合材料 切削力 切削温度 刀具磨损特征 |
Study on Tool Wear Characteristics during Turning Titanium Matrix Composite Using PCD and Carbide Tools |
| |
| Huan Haixiang,Xu Jiuhua,Su Honghua,Fu Yucan,Liang Xinghui,Ge Yingfei.Study on Tool Wear Characteristics during Turning Titanium Matrix Composite Using PCD and Carbide Tools[J].China Mechanical Engineering,2016,27(14):1877. |
| |
| Authors: | Huan Haixiang Xu Jiuhua Su Honghua Fu Yucan Liang Xinghui Ge Yingfei |
| |
| Affiliation: | 1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Yancheng Institute of Technology,Yancheng,Jiangsu,224051
3.Shanghai Institute of Aerospace Precision Machinery,Shanghai,201600
4.Nanjing Institute of Technology,Nanjing,211167 |
| |
| Abstract: | The cutting performance comparison of polycrystalline diamond(PCD) and carbide tools was carried out when turning in-suit TiBw/TiCp reinforced titanium matrix composites at the cutting speed of 60~120m/min. Research results show that three-dimensional cutting force of PCD tools is of approximate 77% to 88% of carbide tools, cutting temperature of PCD tools is of approximate 65% to 82% of carbide tools. PCD tools experienced initial severe wear and stable wear stage, while carbide tools only experienced severe wear stage. Furthermore, abrasive wear and adhesive wear are the predominant wear forms of PCD tools. However, crater wears obviously arised on the rake face of carbide tools are adhesive wear and diffusive wear are the main wear forms. |
| |
| Keywords: | titanium matrix composite cutting force cutting temperature tool wear characteristics |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
