首页 | 本学科首页   官方微博 | 高级检索  
     

内嵌管式辐射地板传热简化模型研究
引用本文:胡孟娣,彭钦磊.内嵌管式辐射地板传热简化模型研究[J].建筑科学,2012,28(6):106-109.
作者姓名:胡孟娣  彭钦磊
作者单位:1. 浙江科技学院,浙江杭州,310023
2. 华中科技大学,湖北武汉,430074
摘    要:本文建立了考虑绝热层向下传热的内嵌管式辐射地板传热的简化计算模型,并获取了其解析解。同时对该地板辐射传热进行了数值模拟,计算结果可作为评价解析解准确性的参考标准。计算结果表明,不考虑绝热层向下传热的地板表面温度及热流解析解结果与数值模拟结果有很大的差异;考虑绝热层向下传热的地板表面温度及热流解析解结果与数值模拟结果比较吻合,温度平均误差为0.22℃,热流平均相对误差为3.2%。

关 键 词:内嵌管式辐射地板  简化模型  解析解  数值模拟

Development of Simplified Thermal Model of Pipe-embedded Radiant Floors
HU Meng-di , PENG Qin-lei.Development of Simplified Thermal Model of Pipe-embedded Radiant Floors[J].Building Science,2012,28(6):106-109.
Authors:HU Meng-di  PENG Qin-lei
Affiliation:1.Zhejiang University of Science and Technology,Hangzhou 310023,Zhejiang,China;2.Huazhong University of Science and Technology,Wuhan 430074,Hubei,China)
Abstract:In this paper,a simplified model for obtaining the analysis solution of pipe-embedded radiant floor was developed by considering the downward heat transfer through insulation layer.Numerical simulation for this floor was also conducted,which was taken as the benchmark for evaluating the analysis solution.The results shown the calculated surface temperature and heat flux by the analysis solution without considering the heat transfer through insulation layer had a big difference from the simulation results.However,the calculated surface temperature and heat flux by the analysis solution with considering the heat transfer through insulation layer agreed well with the simulation results.The average surface temperature error was 0.22 ℃,and the relative average error of heat flux was 3.2%.
Keywords:pipe-embedded radiant floor  simplified model  analysis solution  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号