首页 | 本学科首页   官方微博 | 高级检索  
     

Ni元素对Al-Si-Cu基真空钎焊料接头性能的影响
引用本文:刘志杰,康慧,曲平.Ni元素对Al-Si-Cu基真空钎焊料接头性能的影响[J].铝加工,2005(5):6-8.
作者姓名:刘志杰  康慧  曲平
作者单位:北京航空航天大学,北京,100083
摘    要:研究了添加Ni的Al-Si-Cu基钎料真空钎焊LF21铝合金接头的力学性能、微观组织形貌.结果表明,采用添加Ni元素的真空钎料,可提高钎焊接头的剪切强度,其机制在于Ni元素能够改善LF21铝合金真空钎焊接头焊缝及其基体组织的分布.但随着Ni元素含量的增加,其钎料的熔点也有所提高.

关 键 词:LF21  真空钎焊  钎焊接头  力学性能  微观组织
文章编号:1005-4898(2005)05-006-03
收稿时间:2005-08-11
修稿时间:2005年8月11日

Effect of Ni Element on the Property of Vacuum Brazing Joint of Al-Si-Cu Base Alloy
LIU Zhi-jie,KANG Hui,QU Ping.Effect of Ni Element on the Property of Vacuum Brazing Joint of Al-Si-Cu Base Alloy[J].Aluminium Fabrication,2005(5):6-8.
Authors:LIU Zhi-jie  KANG Hui  QU Ping
Affiliation:Beijing Aerospace University, Beijing 100083, China
Abstract:The mechanical property and microstructure of vacuum brazing joint of LF21 aluminum alloy after addition Ni to Al- Si Cu base brazing flux. The result shows that the cutting strength of brazing joint can be improved using vacuum brazing flux with addition of Ni. The mechanism is that Ni eleanent can improve the vacuum brazing joim and the distribution of its matrix structure. Melting point of brazing flux increased with Ni contem.
Keywords:LF21  vacuum brazing  brazing joint  mechanical property  microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号