| 热力膨胀阀容量测试系统的设计 |
| |
| 引用本文： | 董长盛,;郭晓铃,;彭军皓. 热力膨胀阀容量测试系统的设计[J]. 工业仪表与自动化装置, 2014, 0(4): 43-46 |
| |
| 作者姓名： | 董长盛, 郭晓铃, 彭军皓 |
| |
| 作者单位： | [1]浙江金宸三普换热器有限公司,浙江诸暨311802; [2]中国计量学院计量测试工程学院,杭州310018 |
| |
| 摘 要： | 针对目前热力膨胀阀容量测试设备自动化程度低、测试精度低等缺点,依据国标QC/T663—2000的测试方法,设计了一套热力膨胀阀容量测试系统。在硬件设计上,该系统由开度测试装置、制冷剂流量测试装置和控制模块组成。在软件设计上,利用Visual Basic 6.0开发了一套可视化的测试软件。容量测试结果表明,该系统能较好地实现热力膨胀阀的容量测试,其测试精度达到了1.0%。
|
| 关 键 词： | 热力膨胀阀 开度 流量 容量测试 |
Design of capacity test system for thermal expansion valve |
| |
| Affiliation: | DONG Changsheng, GUO Xiaoling, PENG Junhao (1. Company of Zhejiang Jinchen Sanpu Heat Exchanger, Zhejiang Zhuji 310018, China; 2. College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou 310018, China) |
| |
| Abstract: | In order to deal with the shortcomings of the capacity detection device for thermal expan-sion valve, such as low automatic level and poor test accuracy, a capacity test system for thermal expan-sion valve is designed according to the test method which is provided by the national standard QC/T 663-2000. On the hardware design, the system consists of opening test device, refrigerant flow test device and control module. On the software design, this paper use Visual Basic 6. 0 developed a set of visual test software. The experimental results of capacity test showed that the system could well realize the ca-pacity test of the thermal expansion valve, and its test accuracy had reached 1. 0%. |
| |
| Keywords: | thermal expansion valve opening flow capacity test |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
