首页 | 本学科首页   官方微博 | 高级检索  
     

用于SRAM的低功耗位线结构
引用本文:高宁,施亮,侯卫华,于宗光.用于SRAM的低功耗位线结构[J].半导体技术,2006,31(12):935-937,950.
作者姓名:高宁  施亮  侯卫华  于宗光
作者单位:1. 江南大学,信息工程学院,江苏,无锡,214036
2. 江南大学,信息工程学院,江苏,无锡,214036;中国电子科技集团58研究所,江苏,无锡,214035
摘    要:提出了一种用于SRAM的低功耗位线结构,通过两种途径来实现低位线电压.在写操作时,利用单边驱动结构来抑制位线上充电电压的过大摆动;在读写操作时,改进预充结构来使位线电压保持较低.仿真表明,该结构使功耗大大节省.

关 键 词:静态存储器  位线  低功耗  SRAM  低功耗  线结构  仿真  改进  读写操作  充电电压  位线  驱动结构  单边  利用  线电压
文章编号:1003-353X(2006)12-0935-03
收稿时间:2006-05-19
修稿时间:2006-05-19

Low-Power Bitline Architecture in SRAM
GAO Ning,SHI Liang,HOU Wei-hua,YU Zong-guang.Low-Power Bitline Architecture in SRAM[J].Semiconductor Technology,2006,31(12):935-937,950.
Authors:GAO Ning  SHI Liang  HOU Wei-hua  YU Zong-guang
Abstract:A low-power bitline architecture in SRAM was proposed, the low bitline voltage was realized by incorporating two techniques. A one-side driving scheme was used for the write operation to prevent the excessive full-swing charging on the bitlines. The precharging scheme was removed for both read and write operations, making the bitlines at low voltages. Simulation showed that such architecture could lead a significant power reduction.
Keywords:SRAM  bitline  low-power
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号