| 航空锻件的超声成像技术 |
| |
| 引用本文： | 蒋志峰,陈继芳. 航空锻件的超声成像技术[J]. 声学技术, 2009, 28(2): 121-124. DOI: 10.3969/j.issn.1000-3630.2009.02.006 |
| |
| 作者姓名： | 蒋志峰 陈继芳 |
| |
| 作者单位： | 1. 浙江科技学院机械与汽车工程学院,杭州,3100232;浙江省计量科学研究院,杭州,310013
2. 秦山第三核电有限公司,浙江海盐,314300 |
| |
| 摘 要： | 由于锻件表面不平整，且厚度不均，目前超声扫查系统普遍采用手工超声波探伤法检测锻件内部缺陷，无法应用标准的B扫描成像和C扫描成像，存在着效率低、探伤质量较差等不足之处。提出了以“厚度-灰度”超声检测为核心的基本成像过程，包括路径规划、全波采样、信号处理、波形分析和缺陷扫描成像等方法，并示例实现。该检测手段有助于促进航空锻件超声检测的智能化，提高检测的效率和可靠性。
|
| 关 键 词： | 超声成像 缺陷识别 锻件 |
| 收稿时间： | 2008-01-09 |
| 修稿时间： | 2008-05-12 |
Ultrasonic imaging technology of aviation forged piece |
| |
| JIANG Zhi-feng and CHEN Ji-fang. Ultrasonic imaging technology of aviation forged piece[J]. Technical Acoustics, 2009, 28(2): 121-124. DOI: 10.3969/j.issn.1000-3630.2009.02.006 |
| |
| Authors: | JIANG Zhi-feng and CHEN Ji-fang |
| |
| Affiliation: | JIANG Zhi-feng, CHEN Ji-fang (1. School of Mechanical and Automative Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China; 2. Zhejiang Province Institute of Metrology, Hangzhou 310013, China; 3. The Third Qinshan Nuclear Power Company, Haiyan 314300, Zhejiang, China) |
| |
| Abstract: | Due to rough surface and thickness non-uniformity of forging pieces, manual ultrasonic testing has been commonly used in forging scanning system. As a result, low efficiency and poor quality are unavoidable for not being able to use the standard B-scan and C-scan imaging techniques. In this paper the ultrasonic testing methods of ＂depth-gray＂ imaging, which includes the path planning, full-wave sampling, signal processing, wave-form analysis and scanning imaging for flaw, is proposed, and thereafter illustrated with its promising effects in practical application. The approach is especially useful in promoting intelligence and automation of ultrasonic testing of aircraft forging and thereby improves the efficiency and reliability of testing. |
| |
| Keywords: | ultrasonic imaging flaw recognition forge piece |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《声学技术》浏览原始摘要信息 |
|
点击此处可从《声学技术》下载免费的PDF全文 |
|
