| 棒材连轧机切头飞剪的控制系统 |
| |
| 引用本文： | 任云萍. 棒材连轧机切头飞剪的控制系统[J]. 天津冶金, 1998, 0(4): 25-27 |
| |
| 作者姓名： | 任云萍 |
| |
| 作者单位： | 天津市轧三制钢有限公司 |
| |
| 摘 要： | 介绍了轧三制钢有限公司型钢一分厂棒材全连轧机的切头、切尾飞剪控制系统,在该系统中由于采用先进的硬件和软件设计技术,飞剪的剪切精度达到 50mm。
|
| 关 键 词： | 主轧线 飞剪 控制 剪切 |
The Control System For Flying Shears of Bar Rolling Mill |
| |
| Tianjin No. Steel Rolling Co.,Ltd Ren Yunping. The Control System For Flying Shears of Bar Rolling Mill[J]. Tianjin Metallurgy, 1998, 0(4): 25-27 |
| |
| Authors: | Tianjin No. Steel Rolling Co. Ltd Ren Yunping |
| |
| Affiliation: | Tianjin No. 3 Steel Rolling Co.,Ltd Ren Yunping |
| |
| Abstract: | To introduce the control system for flying crop shears of bar rolling mill at No. 3 Steel Rolling Co. ,Ltd. In this system, the cut -to -length accuracy reaches 50mm by means of advanvced design of hardware and software. |
| |
| Keywords: | main rolling line flying shears control cutting |
| 本文献已被 CNKI 维普 等数据库收录！ |
